Pass4Test setzt sich aus den riesigen IT-Eliteteams zusammen. Sie alle haben hohe Autorität im IT-Bereich. Sie nutzen professionelle Kenntnisse und Erfahrungen aus, um den an den IT-Zertifizierungsprüfungen beteiligenden Kandidaten die Trainingsinstrumente zu bieten. Die Genauigkeit von Fragen und Antworten von Pass4Test ist sehr hoch. Wir versprechen, dass Sie zum ersten Versuch die Prüfung 100% bestehen können. Außerdem stehen wir Ihnen einen einjährigen Update-Service zur Verfügung.
Wenn Sie die schwierige Motorola Solutions MSC-122 Zertifizierungsprüfung bestehen wollen, ist es unmöglich für Sie bei der Vorbereitung keine richtige Prüfungsunterlagen benutzen. Wenn Sie die ausgezeichnete Unterlagen finden wollen, sollen Sie an Pass4Test diese Prüfungsunterlagen suchen. Wir Pass4Test haben sehr guten Ruf und haben viele ausgezeichnete IT-Zertifizierung dumps. Und wir bieten kostenlose Musters aller verschieden dumps. Wenn Sie suchen, ob Pass4Test dumps für Sie geeignet sind, können Sie zuerst die Musters herunterladen und probieren.
Um keine Reue und Bedauern in Ihrem Leben zu hinterlassen, sollen Sie jede Gelegenheit ergreifen, um das Leben zu vebessern. Haben Sie das gemacht?Die Schulungsunterlagen zur Motorola Solutions MSC-122 Zertifizierungsprüfung von Pass4Test helfen den IT-Fachleuten, die Erfolg erzielen wollen, die Motorola Solutions MSC-122 Zertifizierungsprüfung zu bestehen. Um den Erfolg nicht zu verpassen, machen Sie doch schnell.
Eine breite Vielzahl von Motorola Solutions Pass4Test MSC-122 Prüfung Fragen und AntwortenLogische ursprünglichen Exponate für Pass4Test MSC-122 Deploy WLAN Solutions Prüfungsfragen 100% genaue Antworten von Industrie-Experten gelöstFalls erforderlich aktualisiert Motorola Solutions Pass4Test MSC-122 Prüfungsfragen Pass4Test MSC-122 Fragen und Antworten sind die gleichen wie sie die Real Motorola Solutions Zertifizierungsprüfungen erscheinen. Viele der Pass4Test MSC-122 Deploy WLAN Solutions Prüfungsvorbereitung Antworten sind in Vielfache-Wahl-Fragen (MCQs) FormatQualität geprüften Deploy WLAN Solutions Produkte viele Male vor der VeröffentlichungKostenlose Demo der Prüfung Pass4Test MSC-122 an Pass4Test.de
Exam Code: MSC-122
Prüfungsname: Deploy WLAN Solutions
Aktulisiert: 2014-04-28
Nummer: 113 Q&As
MSC-122 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/MSC-122.html
NO.1 Which of the following is the primary method of collision avoidance in an 802.11 CSMA/CA WLAN?
A. Backoff Timer
B. Carrier Sense
C. Contention Window
D. Enhanced Distributed Channel Access (EDCA)
E. Distributed Coordination Function Interframe Spaces (DIFS)
Answer: B
Motorola Solutions MSC-122 MSC-122 zertifizierungsantworten MSC-122 MSC-122 exam fragen
NO.2 Your customer has requested that during the upcoming 802.llg to 802.11n upgrade deployment you
enable 40 MHz channels on 1, 6, and 11 of the 2.4 GHz ISM band. You respond by saying that there is not
enough spectrum to allow 40 MHz channels centered on 1, 6, and 11. How wide are standard 802.11g
(OFDM) channels?
A. 20 MHz
B. 83.5 MHz
C. 5 MHz
D. 11 MHz
E. 22 MHz
Answer: A
Motorola Solutions MSC-122 MSC-122 MSC-122
NO.3 You are designing a WLAN that will support multiple BSS IDs. One of the characteristics you need to
take into consideration is that each BSS transmits a beacon every 100 ms. How many BSSs can be
enabled on the following Motorola access points under WiNG 5: AP7131, AP650, AP6532?
A. 2, one per radio
B. 1 per AP, it is shared between the radios to provide seamless roaming
C. 8, four per radio
D. 16, eight per radio
Answer: D
Motorola Solutions MSC-122 MSC-122 MSC-122 zertifizierung
NO.4 You are performing a physical site survey of a new WiNG 5 WLAN deployment. Which of the following is
CORRECT?
A. The Signal to Noise Ratio (SNR) is a critical measurement that needs to be addressed.
B. It is acceptable that you use any RF infrastructure device (Access Point) to perform the site survey test.
C. Using default settings of a site survey application will provide an adequate site survey result.
D. Customer throughput requirements are the only criteria for which need to be surveyed.
Answer: B
Motorola Solutions MSC-122 prüfungsfrage MSC-122
NO.5 Which of the following statements is NOT considered to be a best practice with respect to the wired
backbone serving the WLAN.?
A. When performing manual configuration of a point-to-point Ethernet link, ensure that both the speed and
the duplex mode settings on the two ports match.
B. When creating a link between Ethernet 10/100BASE-T or 10/100/1000BASE-T ports, enable (or accept
the default of) auto-negotiation on both ports.
C. When creating a link between Gigabit Ethernet fiber ports, enable (or accept the default of)
auto-negotiation.
D. When creating a link between Gigabit Ethernet fiber ports, disable auto-negotiation on both ports.
Answer: D
Motorola Solutions MSC-122 prüfungsfragen MSC-122 MSC-122
NO.6 You have just conducted a throughput test using iPerf on a WLAN that shows a PHY signaling rate of 54
Mbps, however the average throughput rate shown in iPerf is only 23.5 Mbps. What is the most likely
explanation for this condition?
A. This throughput speed is considered nominal.
B. This throughput rate could indicate a mismatch between Wi-Fi confidentiality algorithms.
C. This throughput rate indicates excessive user activity.
D. This throughput rate indicates excessive out-of-band interference such as nearby cell phone towers.
Answer: A
Motorola Solutions exam fragen MSC-122 MSC-122 MSC-122
NO.7 Your customer has requested that you configure unique VLANs for voice, normal user data with
802.1X security, guest access, and management traffic. Which of the following VLAN modes can support
this request?
A. Native Mode
B. Access Mode
C. Trunk Mode
D. Aggregation Mode
E. Encapsulation Mode
Answer: C
Motorola Solutions zertifizierung MSC-122 prüfungsfrage MSC-122
NO.8 You are deploying a new WLAN within the WiNG 5 architecture. Which of the following is the only
UNSUPPORTED Motorola access point/port?
A. AP-300
B. AP-650
C. AP-5131
D. AP-7131
Answer: C
Motorola Solutions MSC-122 MSC-122 prüfungsunterlagen MSC-122 prüfungsfragen
NO.9 You have an access point that requires PoE connected to a switch with a 150 meter 10 BASE-T CAT 5
cable. During testing numerous problems with both data transmission and intermittent power occurs.
Which of the following is most likely the cause?
A. The cable should be CAT 6
B. There is a duplex mismatch
C. The cable should be 100 BASE-T
D. The cable is too long
Answer: D
Motorola Solutions echte fragen MSC-122 originale fragen MSC-122 prüfungsunterlagen
NO.10 Which of the following APs does not support adaptive mode?
A. AP7131
B. AP6532
C. AP650
D. AP6521
Answer: A
Motorola Solutions MSC-122 prüfungsfrage MSC-122 testantworten MSC-122 MSC-122 prüfung MSC-122
NO.11 If a Motorola access point induces a 50 mW RF signal onto a 3 dBi antenna, what will be the resulting
EIRP of the transmitted signal?
A. 0 dBm
B. 3 dBm
C. 20 dBm
D. 50 mW
E. 50 dBm
Answer: C
Motorola Solutions dumps MSC-122 prüfungsfragen MSC-122 prüfung
NO.12 Which of the following statements regarding the configuration of Motorola RFS controllers is TRUE?
A. ADSP can be used to push CLI profiles to APs and controllers.
B. LANPlanner can be used to push CLI profiles to APs and controllers.
C. RFMS can be used to perform predictive site surveys using an RFS controller
D. WiNG 5 can be used to perform manual site surveys using an RFs controller
E. CLI can be used to perform both manual and predictive site surveys using an RFS controller.
Answer: A
Motorola Solutions MSC-122 prüfungsunterlagen MSC-122
NO.13 You have configured a Motorola RFS controller using WiNG 5 and have attempted to adopt a group of
APs using L2 adoption but the adoption is not successful. You have confirmed the following:
-All of the APs have an Ethernet connection to the same LAN segment as the controller -Spanning Tree
Protocol (STP) has been disabled on the APs next hop switch port -Intermediate firewalls are not blocking
EtherType 0x8783
Given this scenario, which of the following is the most likely cause of the unsuccessful AP adoption?
A. DHCP option 192 has not been defined on the DHCP server
B. A local VLAN has been configured on both the controller and the APs
C. The APs GE ports have been configured for an S02.1q-tagged native VLAN
D. The APs GE ports have been configured for an 802.1q-untagged native VLAN
Answer: C
Motorola Solutions prüfungsfragen MSC-122 MSC-122 originale fragen MSC-122 MSC-122
NO.14 During a recent throughput analysis test of your 802.11g network, you discovered that performance is
poor in comparison to previous baselines. You discover that this is the result of 802.11b stations becoming
associated with your access point. What option could you implement to eliminate 802.lib clients from
attaching to your network?
A. Implement protection mechanisms
B. Make 24 mbps a required data rate
C. Implement RTS/CTS at the access point
D. Change the channel used for the network
Answer: B
Motorola Solutions exam fragen MSC-122 MSC-122 originale fragen
NO.15 You are deploying a new system and are creating the RF Domain(s). Which of the following options
would you use to group the APs into the same domain?
A. By VLAN, where all APs are on the same subnet.
B. By site, which can be a location where the group of installed APs can hear each other's beacons.
C. By name, so they can be easily sorted in the tree view of the controller.
D. By deployment phase, so configurations can be accidentally pushed to newly installed APs.
Answer: A
Motorola Solutions MSC-122 MSC-122 MSC-122 testantworten
Pass4Test bietet Ihnen die neusten LOT-410 exam Unterlagen und VCAC510 pdf Fragen & Antworten mit hoher Qualität. Unser NS0-156 zertifizierung und 646-048 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative C_TFIN52_66 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/MSC-122.html
没有评论:
发表评论