2014年3月3日星期一

IBM 000-314 prüfungsfrage

Es ist uns allen klar, dass das Hauptproblem in der IT-Branche ein Mangel an Qualität und Funktionalität ist. Pass4Test IBM 000-314 Fragen und Antworten stehen Ihnen alle notwendigen Schulungsunterlagen zur Verfügung. Ähnlich wie die reale Zertifizietungsprüfung verhelfen die Multiple-Choice-Fragen Ihnen zum Bestehen der Prüfung. Die IBM 000-314-Prüfung Schulungsunterlagen von Pass4Test sind überprüfte Prüfungsmaterialien. Alle diesen Fragen und Antworten zeigen unsere praktische Erfahrungen und Spezialisierung.

Die Schulungsunterlagen zur IBM 000-314 Zertifizierungsprüfung zu benutzen können Sie ganz schnell und leicht die Prüfung bestehen. Das haben viele Kandidaten uns gesagt. Mit den Schulungsunterlagen zur IBM 000-314 Zertifizierungsprüfung können Sie Ihre Gedanken ordnen und sich ganz gelassen auf die Prüfung vorbereiten. Das reduziert nicht nur Stress, sonder hilft Ihnen, die Prüfung zu bestehen. Pass4Test hat auch kostenlose Fragen und Antworten als Probe. Meines Erachtens nach können Sie die Probeversion benutzen, dann wird sie Ihnen ganz passen. Sie werden selber ihre Wirkung kennen.

Exam Code: 000-314
Prüfungsname: IBM WebSphere Message Broker V6.1. System Administration
Aktulisiert: 2014-03-03
Nummer: 106 Q&As

Die Fragen zur IBM 000-314 Zertifizierungsprüfung von Pass4Test sind die gründlichste, die genaueste und die neueste Praxistest. Sie werden Selbstbewusstsein finden, die Schwierigkeiten nur einmal zu überwinden. Die IBM 000-314 Zertifizierungsprüfung wird von allen Ländern akzeptiert. Alle Länder werden sie gleich behandeln. Das IBM 000-314 Zertifikat wir Ihnen nicht nur helfen, Ihre Fachkenntnisse und Fähigkeiten zu verbessern, sondern auch mehrere Chancen für Ihr Berufsleben zu eröffnen.

Es ist besser, zu handeln als die anderen zu beneiden. Die Schulungsunterlagen zur IBM 000-314-Prüfung von Pass4Test wird Ihr erster Schritt zum Erfolg. Mit Pass4Test können Sie sicher die schwierige IBM 000-314-Prüfung Zertifizierung bestehen. Mit diesem Zertifikat können Sie ein Licht in Ihrem Herzen anzünden und neue Wege einschlagen und ein erfolgreiches Leben führen.

Wenn Sie eine gute Lernwebsite, die Ihnen hilft, die 000-314 Prüfung zu bestehen, ist Pass4Test die beste Wahl. Per Pass4Test können Sie die Spitzenfertigkeiten in der IT-Branche meistern und die IBM 000-314 Zertifizierungsprüfung leicht bestehen. Es ist allen bekannt, dass diese Prüfung schwer zu bestehen ist. Und die Erfolgsquote für die Prüfung ist sehr niedrig. Aber Sie können geeignete Lerninstrumente und Fragen und Antworten zur IBM 000-314 Zertifizierungsprüfung von Pass4Test wählen. Diese Schulungsunterlagen ist nicht nur vollständig, sondern umfasst auch viele Wissensgebiete. Ihre Ähnlichkeit mit den echten Prüfungen ist sehr hoch. Das wird von der Praxis bewiesen. Wenn Sie die IBM 000-314 Zertifizierungsprüfung bestehen, wählen Sie doch Pass4Test. Ganz richtig!

Sie haben schon die Schulungsunterlagen zur IBM 000-314 Zertifizierungsprüfung von Pass4Test gesehen. Es ist doch Zeit, eine Wahl zu treffen. Sie können auch andere Produkte wählen, aber unser Pass4Test wird Ihnen die größten Interessen bringen. Mit Pass4Test werden Sie eine glänzende Zukunft haben, eine bessere Berufsaussichten in der IT-Branche haben und effizient arbeiten.

Nun gibt es viele IT-Profis in der ganzen Welt und die Konkurrenz der IT-Branche ist sehr hart. So viele IT-Profis entscheiden sich dafür, an der IT-Zertifizierungsprüfung teilzunehmen, um ihre Position in der IT-Branche zu verstärken. Die 000-314-Prüfung ist eine sehr wichtige IBM-Zertifizierungsprüfung. Aber wenn Sie eine IBM-Zertifizierung erhalten wollen, müssen Sie die Prüfung bestehen.

000-314 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/000-314.html

NO.1 An administrator needs to control domain objects that are deployable. To which three objects is it
possible to grant the Deploy Access Control List (ACL) permission?
A.Broker
B.Topology
C.Root Topic
D.Subscription
E.Execution Group
F.Configuration Manager
Answer:A C E

IBM prüfung   000-314   000-314 zertifizierungsantworten

NO.2 A broker administrator needs to connect via the Configuration Manager Proxy API Exerciser to a
configuration manager running on Solaris which was configured using default settings and managing a
BRKR1 broker running on a Windows XP environment. What four selections need to be furnished to
successfully connect to the configuration manager?
A.Port number 1414
B.Configuration Manager name
C.BRKR1 queue manager name
D.Configuration Manager hostname
E.SYSTEM.BKR.CONFIG channel name
F.Configuration Manager queue manager name
G.SYSTEM.DEFAULT.BKR.CONFIG channel name
Answer:A D E F

IBM   000-314   000-314   000-314 echte fragen   000-314 prüfungsfrage   000-314 zertifizierungsfragen

NO.3 In a new implementation of the WebSphere Message Broker (WMB), an insurance company has
decided that the Message Broker Explorer (SupportPac IS02) will be implemented. They have never used
JMS with WebSphere MQ. Which feature in the Message Broker Explorer requires MQ JMS configuration?
A.Adopt a new broker
B.Full service tracing
C.WebSphere DataPower Security Wizard
D.Connect to a remote configuration manager
Answer:C

IBM zertifizierungsfragen   000-314   000-314 prüfungsunterlagen   000-314 exam fragen

NO.4 A production broker in a large bank is being configured to allow WebSphere Application Server to be the
JMS provider. Defaults were used for directory paths during installation of the product. When creating a
JMSProvider configurable service for the WebSphere_WAS_Client, the administrator issues the following
command: mqsichangeproperties WBRK6_DEFAULT_BROKER -c JMSProviders -o
WebSphere_WAS_Client By default, where must the provider's Jar files be located on an AIX production
broker system?
A./var/mqsi/shared-classes
B./opt/IBM/mqsi/6.1/classes
C./var/mqsi/common/profiles
D./opt/IBM/mqsi/6.1/JMSProviders
Answer:A

IBM   000-314 prüfungsfrage   000-314

NO.5 The administration team has decided to retain control over the infrastructure but wants to allow the
developers to deploy flows at will in the development environment. The developers need to change trace
and debug properties of execution groups (EGs), but not brokers. Which Access Control List (ACL)
permissions do the developers require?
A.Full to the EGs
B.View to the Root and Edit to the EGs
C.View to the Brokers and Deploy to the EGs
D.Deploy to the Brokers and Edit to the EGs
Answer:A

IBM   000-314   000-314   000-314

NO.6 Under a load test in the Pre-PROD environment, the performance test has shown that the broker
cannot sustain the required peak number of HTTP connection requests. What is an appropriate action?
A.Create another Execution Group and deploy another copy of the flow.
B.Change the httplistener component parameter '-n maxThreads' to a higher value.
C.Increase the number of 'Additional Instances' of the flow and redeploy the flow.
D.Increase the number of 'Additional Instances' of the HTTPInput node and redeploy the flow.
Answer:B

IBM testantworten   000-314   000-314

NO.7 As part of the migration from WebSphere Message Broker (WMB) V6.0 to V6.1, a developer has
provided the administrator a list of Java user-defined nodes that need to be migrated. The migration will
be from WMB V6.0 on one machine to WMB V6.1 on a different machine. Which three steps need to be
performed?
A.Clean the project in the Package Explorer.
B.Import the user-defined node project into the V6.1 Toolkit.
C.Use Rational Product Updater (RPU) to perform the migrations.
D.Run mqsimigratecomponents specifying the user Jar files directory.
E.Store the .pdb file in the directory specified by the -l parameter on the mqsichangebroker command.
F.Store the .jar file in the directory specified by the -l parameter on the mqsichangebroker command.
Answer:A B F

IBM echte fragen   000-314 zertifizierungsfragen   000-314   000-314 zertifizierung   000-314   000-314 prüfungsfragen

NO.8 A developer is writing an application that needs to coordinate the processing of MQ messages and
database updates in a message flow for distributed systems. What does the broker administrator need to
configure as the XA Resource Manager?
A.The broker
B.The database
C.The queue manager
D.The operating system
E.The configuration manager
Answer:C

IBM zertifizierungsantworten   000-314   000-314   000-314

NO.9 A large bank has six brokers that are geographically dispersed. Three of the brokers are used in a
publish/subscribe collective while three are not. For backup purposes, the decision has been made to use
three cloned brokers. Which choice is the most appropriate?
A.Use only one broker in the collective as a clone.
B.Use all three of the brokers in the collective as the clones.
C.Make two brokers from the collective clones, in case one fails.
D.Use no brokers in the collective as clones, it is not permitted.
Answer:A

IBM antworten   000-314 originale fragen   000-314 dumps   000-314 echte fragen

NO.10 Files in the specified input directory are not being processed by a flow that uses a FileInput node. The
error messages indicate that the file nodes cannot continue executing (BIP3331). What is the cause of the
error messages?
A.The file is locked during this directory scan.
B.The input file exceeds the maximum file size.
C.The broker does not have the required access to these files and directories.
D.There is more than one instance of this message flow deployed to this computer.
Answer:C

IBM zertifizierung   000-314   000-314 originale fragen   000-314   000-314 prüfungsfrage

NO.11 A company has its broker BRK running on machine brk.comp.com under the queue manager BRKQM
listening at port 1414. It is registered to configuration manager CFGMGR running on machine
cfg.comp.com under the queue manager CFGQM listening at port 1420. An administrator is entrusted
with the task of creating an execution group EXE1 under the broker BRK. Which command should be run
to achieve this task?
A.mqsicreateexecutiongroup -i brk.comp.com -q CFGQM -b BRK -e EXE1
B.mqsicreateexecutiongroup -i cfg.comp.com -n CFGMGR -b BRK -e EXE1
C.mqsicreateexecutiongroup -i cfg.comp.com -p 1420 -q CFGQM -b BRK -e EXE1
D.mqsicreateexecutiongroup -i brk.comp.com -p 1414 -q BRKQM -b BRK -e EXE1
Answer:C

IBM exam fragen   000-314 prüfungsunterlagen   000-314 zertifizierungsantworten   000-314   000-314 prüfungsfragen

NO.12 A broker administrator must set up policy set bindings for a new message flow. The flow includes the
following SOAP nodes: SOAPInput, SOAPAsyncRequest, SOAPAsyncResponse and SOAPReply. Which
two SOAP nodes result in the need for a consumer policy set binding definition?
A.SOAPInput
B.SOAPReply
C.SOAPAsyncRequest
D.SOAPAsyncResponse
Answer:C D

IBM   000-314   000-314 originale fragen   000-314   000-314 testantworten

NO.13 A large utility company has decided to implement messaging using WebSphere MQ with WebSphere
Message Broker (WMB) V6.1. The production broker will be hosted on the z/OS system where Resource
Recovery Service (RRS) has been configured and is active. What must the administrator do to ensure all
transactional message flows will be globally coordinated on this production broker?
A.Nothing.
B.Ensure the message flow is configured as a coordinated transaction in the bar file.
C.In the bar file, ensure the Transaction mode setting for the MQInput node is properly set to "Yes" and all
other Transaction modes are set to "Automatic".
D.Configure DB2 for XA coordination; configure the queue manager for XA coordination; and ensure the
message flow is configured as a coordinated transaction in the bar file.
Answer:A

IBM prüfungsunterlagen   000-314 prüfung   000-314   000-314 echte fragen

NO.14 An administrator wants to quickly configure a broker to make use of HTTP over SSL on a development
environment with minimum configuration. Which property must be set by running the command
mqsichangeproperties?
A.port
B.keystorePass
C.keystoreFile
D.enableSSLConnector
Answer:D

IBM   000-314 exam fragen   000-314 testantworten   000-314 exam fragen

NO.15 A company's IT division has a broker domain consisting of a single broker BRK configured to
configuration manager CFGMGR. Both the components are running on a single AIX server. A new
security policy was put in place by the company which required all components to be started and stopped
under a new user ID. Which setup does the administrator need to perform to enable the broker and
configuration manager to be started or stopped with the new user ID?
A.Create a UserNameServer and add the new user ID.
B.Add the new user ID to mqm and mqbrkrs groups of the machine.
C.Run the mqsichangebroker command with the new user ID and password.
D.Run the mqsichangedbimgr command with the new user ID and password.
E.Run the mqsisetdbparms command adding the new user ID and password.
Answer:B

IBM echte fragen   000-314   000-314   000-314 prüfungsfragen

NO.16 A large enterprise is building several application message flows that include HTTPInput nodes. There is
a requirement to take advantage of WS-Security for the decryption of incoming messages to these flows
as well as encryption of data from the flows. The administrator needs to handle the necessary
configuration. What is the most efficient way to do this with the least impact on changing code or broker
configuration?
A.Use the IBM WebSphere MQ Internet Gateway.
B.Implement a WebSphere DataPower appliance.
C.Set up IBM WebSphere Transformation Extender for Integration Servers.
D.Create a new broker on a separate system using it to front-end all the security.
Answer:B

IBM   000-314 prüfungsunterlagen   000-314 zertifizierungsantworten   000-314 antworten

NO.17 A broker domain has two brokers, BRK1 and BRK2, configured to a configuration manager CFGMGR.
A new set of applications wants to take advantage of the publish/subscribe topic-based security. Which
steps does the administrator need to perform?
A.Create a UserNameServer and run the mqsichangeproperties command on the brokers and the
configuration manager to include the UserNameServer name.
B.Run the command mqsichangeproperties command on the brokers and mqsichangeconfigmgr on the
configuration manager to activate Access Control List's on the topics.
C.Run the command mqsijoinmqpubsub against each application name and change all the brokers with
the mqsichangebroker command to enable the security option on topics.
D.Create a UserNameServer and run the mqsichangebroker command on the brokers and
mqsichangeconfigmgr on the configuration manager to include the UserNameServer queue manager
name.
Answer:D

IBM prüfung   000-314   000-314 echte fragen

NO.18 A developer has built a flow that uses the EmailOutput node to send notifications of order shipments.
The SMTP server requires authentication with a specific user ID and password. What does the
administrator need to do before the developer attempts to deploy the flow?
A.Create a security identity with mqsisetdbparms.
B.Update the default SMTP configurable service with mqsiupdatebroker.
C.Create a SMTP configurable service with mqsicreateconfigurableservice.
D.Include the message set that contains the SMTP configuration information.
Answer:A

IBM zertifizierungsantworten   000-314 testantworten   000-314   000-314 testantworten   000-314   000-314 exam fragen

NO.19 An administrator has set up topic-based security as shown in the Exhibit. Which user(s) will have
access to perform publish action on the topic TopicA/TopicY/TopicM?
A.Only user1
B.Only user2
C.Only user3
D.Both user1 and user3
Answer:A

IBM   000-314   000-314   000-314

NO.20 An application has a requirement that tables in the broker database be accessible with an ID that is not
the service ID of the broker using ODBC Data Source Names (DSN). What are the two tasks the
administrator needs to do?
A.Create an ODBC DSN to the broker database with mqsicreatedb.
B.Setup an ODBC DSN to the broker database with mqsi_setupdatabase.
C.Define an ODBC DSN to the broker database with another alias name.
D.Associate the application ID and password with the alias name with the mqsisetdbparms command.
E.Associate the application ID and password with the alias name with the mqsisetsecurity command.
Answer:C D

IBM   000-314 zertifizierungsfragen   000-314   000-314   000-314 zertifizierung

Pass4Test bietet Ihnen die neusten HP0-S33 exam Unterlagen und 1Y0-200 pdf Fragen & Antworten mit hoher Qualität. Unser 70-583 zertifizierung und 250-407 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 200-120 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.

Artikel Link: http://www.pass4test.de/000-314.html

没有评论:

发表评论