2014年2月28日星期五

Microsoft 070-463 originale fragen

Im Informationszeitalter kümmern sich viele Leute um die IN-Branche. Aber es fehlen trozt den vielen Exzellenten doch IT-Fachleute. Viele Firmen stellen ihre Angestellte nach ihren Zertifikaten ein. Deshalb sind die Zertifikate bei den Firmen sehr beliebt. Aber es ist nicht so leicht, diese Zertifikate zu erhalten. Die Microsoft 070-463 Zertifizierungsprüfung ist eine schwierige Zertifizierungsprüfung. Obwohl viele Menschen beteiligen sich an der Microsoft 070-463 Zertifizierungsprüfung, ist jedoch die Pass-Quote eher niedrig.

Wollen Sie Microsoft 070-463 dumps von Pass4Test probieren? Diese dumps sind unbedingt die besten Unterlagen auf dem Markt, die im Zusammenhang mit den Prüfungen sind. Warum? Es gibt die folgenden vier Gründen. Zuerst sind die Prüfungsfragen von Pass4Test von den reichen Erfahrungen der IT-Eliten zusammengeschlossen und auch sehr genau. Zweitens beinhalten Pass4Test dumps alle mögliche Prüfungsfragen in aktuellen Prüfungen Drittens, die Pass4Test dumps garantieren Ihnen, nur einmal diese Prüfung zu bestehen. Wenn die Teilnehmer durchgefallen sind, können Sie die volle Rückerstattung bekommen. Viertes gliedern sich Pass4Test in zwei verschiedenen Versionen, PDF-Versionen und Software-Versionen. Wenn Sie beide dumps kaufen, können Sie diese Prüfung leichter vorbereiten.

Pass4Test ist eine Website, die vielen Kandidaten Bequemlichkeiten bieten, ihre Bedürfnisse abdecken und sowie ihren Traum erfüllen können. Wenn Sie sich noch große Sorgen um die IT-Zertifizierungsprüfungen machen, wenden Sie sich doch an Pass4Test. Pass4Test macht Sie ruhig, weil wir viele Schulungsunterlagen zur IT-Zertifizierungsprüfung haben. Sie sind von guter Qualität, zielgerichtet und enthalten viele Wissensgebiete, die Ihnen große Hilfe leisten können. Wenn Sie Pass4Test wählen, würden Sie niemals bereuen. Denn Sie werden Ihren Berufstraum erreichen können.

Hier Zeigen wir Ihnen den Grundwert von Pass4Test. Pass4Test dumps haben die Durchlaufrate mit 100%. Pass4Test dumps sind die Zusammenfassung von den reichen Erfahrungen der IT-Eliten und wertsvoll. Sie können dumps benutzen, um IT-Zertifizierungsprüfungen vorzubereiten und auch Ihre Fähigkeiten zu entwickeln. Außerdem wenn Sie andere Prüfungskenntnisse kennen lernen, kann es Ihren Wunsch erfüllen.

Exam Code: 070-463
Prüfungsname: Implementing a Data Warehouse with Microsoft SQL Server 2012
Aktulisiert: 2014-02-28
Nummer: 123 Q&As

Die Microsoft 070-463 Prüfungsfragen von Pass4Test sind in Übereinstimmung mit dem neuesten Lehrplan und der echten Microsoft 070-463 Zertifizierungsprüfung. Wir aktualisieren auch ständig unsere Schulungsunterlagen. Alle Produkte erhalten Sie mit einjährigen kostenlosen Updates. Sie können auch das Abozeit verlängern, so dass Sie mehr Zeit bekommen, um sich umfassend auf die Prüfung vorzubereiten. Wenn Sie verwirrt sind oder nicht dafür entscheiden können, ob Sie die Schulungsunterlagen von Pass4Test kaufen oder nicht. Dann können Sie teilweise die Prüfungsfragen und Antworten umsonst in der Pass4Test website als Probe herunterladen. Wenn es Ihnen passt, dann gehen Sie zum Kaufen ohne Bereuung.

Machen Sie sich noch Sorgen um die Microsoft 070-463 Zertifizierungsprüfung?Haben Sie schon mal gedacht, sich an einem entsprechenden Kurs teilzunehmen?Eine gute Ausbildung zu wählen, wird Ihnen helfen, Ihre Fachkenntnisse zu konsolidieren und sich gut auf die Microsoft 070-463 Zertifizierungsprüfung vorbereiten. Das Expertenteam von Pass4Test hat endlich die neuesten zielgerichteten Schulungsunterlagen, die Ihnen beim Vorbereiten der Prüfung helfen, nach ihren Erfahrungen und Kenntnissen erforscht. Die Schulungsunterlagen von Pass4Test ist Ihre optimale Wahl.

070-463 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/070-463.html

NO.1 You are implementing the indexing strategy for a fact table in a data warehouse.The fact table is
named Quotes.The table has no indexes and consists of seven columns:
[ID]
[QuoteDate]
[Open]
[Close]
[High]
[Low]
[Volume]
Each of the following queries must be able to use a columnstore index:
SELECT AVG ([Close]) AS [AverageClose] FROM Quotes WHERE [QuoteDate] BETWEEN '20100101'
AND '20101231'.
SELECT AVG([High] - [Low]) AS [AverageRange] FROM Quotes WHERE [QuoteDate] BETWEEN
'20100101' AND
'20101231'.
SELECT SUM([Volume]) AS [SumVolume] FROM Quotes WHERE [QuoteDate] BETWEEN '20100101'
AND '20101231'.
You need to ensure that the indexing strategy meets the requirements.The strategy must also minimize
the number and size of the indexes.
What should you do?
A.Create one columnstore index that contains [ID], [Close], [High], [Low], [Volume], and [QuoteDate].
B.Create three coiumnstore indexes:
One containing [QuoteDate] and [Close]
One containing [QuoteDate], [High], and [Low]
One containing [QuoteDate] and [Volume]
C.Create one columnstore index that contains [QuoteDate], [Close], [High], [Low], and [Volume].
D.Create two columnstore indexes:
One containing [ID], [QuoteDate], [Volume], and [Close]
One containing [ID], [QuoteDate], [High], and [Low]
Answer: C

Microsoft prüfung   070-463   070-463   070-463 dumps   070-463 zertifizierungsantworten

NO.2 You develop a SQL Server Integration Services (SSIS) package that imports SQL Azure data into a data
warehouse every night.
The SQL Azure data contains many misspellings and variations of abbreviations.To import the data, a
developer used the Fuzzy Lookup transformation to choose the closest-matching string from a reference
table of allowed values.The number of rows in the reference table is very large.
If no acceptable match is found, the Fuzzy Lookup transformation passes a null value.
The current setting for the Fuzzy Lookup similarity threshold is 0.50.
Many values are incorrectly matched.
You need to ensure that more accurate matches are made by the Fuzzy Lookup transformation without
degrading performance.
What should you do?
A.Change the Exhaustive property to True,
B.Change the similarity threshold to 0.55.
C.Change the similarity threshold to 0.40.
D.Increase the maximum number of matches per lookup.
Answer: B

Microsoft zertifizierungsfragen   070-463 zertifizierung   070-463 dumps   070-463   070-463

NO.3 DRAG DROP
You are editing a SQL Server Integration Services (SSIS) package that contains a task with a sensitive
property.
You need to create a project parameter and configure it so that its value is encrypted when it is deployed
to the SSIS catalog.
Which three steps should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:

NO.4 You install a SQL Server 2012 database engine instance on a production server.A month later, you
install SQL Server 2012 Integration Services (SSIS).
You must develop an SSIS project and deploy it to the server by using the Project Deployment model.
Operations Log records that are outside the configured retention period must be cleaned automatically.
You need to create the SSIS catalog on the production server.
What should you do? (Each correct answer presents part of the solution.Choose all that apply.)
A.Enable XP Command Shell.
B.Enable CLR Integration.
C.Enable OLE Automation.
D.Start the SQL Server Browser service.
E.Enable Cross Database Ownership Chaining.
F.Start the SQL Server Agent service.
G.Enable Ad Hoc Remote Queries.
Answer: FA

Microsoft   070-463   070-463   070-463

NO.5 You are developing a SQL Server Integration Services (SSIS) project that copies a large amount of
rows from a SQL Azure database.The project uses the Package Deployment Model.This project is
deployed to SQL Server on a test server.
You need to ensure that the project is deployed to the SSIS catalog on the production server.
What should you do?
A.Open a command prompt and run the dtexec /dumperror /conn command.
B.Create a reusable custom logging component and use it in the SSIS project.
C.Open a command prompt and run the gacutil command.
D.Add an OnError event handler to the SSIS project.
E.Open a command prompt and execute the package by using the SQL Log provider and running the
dtexecui.exe utility.
F.Open a command prompt and run the dtexec /rep /conn command.
G.Open a command prompt and run the dtutil /copy command.
H.Use an msi file to deploy the package on the server.
I.Configure the SSIS solution to use the Project Deployment Model.
J.Configure the output of a component in the package data flow to use a data tap.
K.Run the dtutil command to deploy the package to the SSIS catalog and store the configuration in SQL
Server.
Answer: I

Microsoft   070-463   070-463   070-463   070-463 echte fragen

NO.6 You are reviewing the design of a customer dimension table in an existing data warehouse hosted on
SQL Azure.
The current dimension design does not allow the retention of historical changes to customer attributes
such as Postcode.
You need to redesign the dimension to enable the full historical reporting of changes to multiple customer
attributes including Postcode.
What should you do?
A.Add StartDate and EndDate columns to the customer dimension.
B Add an IsCurrent column to the customer dimension.
C.Enable Snapshot Isolation on the data warehouse.
D.Add CurrentValue and PreviousValue columns to the customer dimension.
Answer: A

Microsoft echte fragen   070-463 antworten   070-463   070-463 antworten   070-463 prüfungsunterlagen

NO.7 You are developing a project that contains multiple SQL Server Integration Services (SSIS)
packages.The packages will be deployed to the SSIS catalog.One of the steps in each package accesses
an FTP site to download sales transaction data.
You create project parameters to store the username and password that are used to access the FTP site.
You need to ensure that the username and password values are encrypted when they are deployed.
What should you do?
A.set the Sensitive property of the parameters to True.
B.Set the ProtectionLevel property of the package to EncryptSensitiveWithUserKey.
C.Change the parameters to package parameters.
D.Change the project to the Legacy Deployment model.
Answer: A

Microsoft exam fragen   070-463 zertifizierung   070-463   070-463 prüfungsunterlagen

NO.8 DRAG DROP
A new SQL Server Integration Services (SSIS) project is deployed to the SSIS catalog.
To troubleshoot some data issues, you must output the data streaming through several data flows into text
files for further analysis.You have the list of data flow package paths and identification strings of the
various task components that must be analyzed.
You need to create these output files with the least amount of administrative and development effort.
Which three stored procedures should you execute in sequence? (To answer, move the appropriate
actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:

NO.9 You are designing a data warehouse for a software distribution business that stores sales by software
title.It stores sales targets by software category.Software titles are classified into subcategories and
categories.Each software title is included in only a single software subcategory, and each subcategory is
included in only a single category.The data warehouse will be a data source for an Analysis Services
cube.
The data warehouse contains two fact tables:
factSales, used to record daily sales by software title
factTarget, used to record the monthly sales targets by software category
Reports must be developed against the warehouse that reports sales by software title, category and
subcategory, and sales targets.
You need to design the software title dimension.The solution should use as few tables as possible while
supporting all the requirements.
What should you do?
A.Create three software tables, dimSoftware, dimSoftwareCategory.and dimSoftwareSubcategory and a
fourth bridge table that joins software titles to their appropriate category and subcategory table records
with foreign key constraints.Direct the cube developer to use key granularity attributes.
B.Create three software tables, dimSoftware, dimSoftwareCategory, and
dimSoftwareSubcategory.Connect factSales to all three tables and connect factTarget to
dimSoftwareCategory with foreign key constraints.Direct the cube developer to use key granularity
attributes.
C.Create one table, dimSoftware, which contains Software Detail, Category, and Subcategory
columns.Connect factSales to dimSoftware with a foreign key constraint.Direct the cube developer to use
a non-key granularity attribute for factTarget.
D.Create two tables, dimSoftware and dimSoftwareCategory.Connect factSales to dimSoftware and
factTarget to dimSoftwareCategory with foreign key constraints.Direct the cube developer to use key
granularity attributes.
Answer: C

Microsoft echte fragen   070-463 exam fragen   070-463 prüfungsfragen

NO.10 You maintain a SQL Server Integration Services (SSIS) package.The package was developed by using
SQL Server 2008 Business Intelligence Development Studio (BIDS).
The package includes custom scripts that must be upgraded.
You need to upgrade the package to SQL Server 2012.
Which tool should you use?
A.SSIS Upgrade Wizard in SQL Server 2008 BIDS
B.SSIS Upgrade Wizard in SQL Server Data Tools
C.SQL Server DTExecUI utility (dtexecui.exe)
D.SQL Server dtexec utility (dtexec.exe)
Answer: B

Microsoft exam fragen   070-463 testantworten   070-463 dumps

NO.11 A SQL Server Integration Services (SSIS) package on a computer is failing periodically in
production.The package was created less than one year ago and was deployed to the SSIS catalog.
Sometimes the package is started on a SQL Agent schedule; sometimes the package is started manually
by an SSIS developer by using the Object Explorer in SQL Server Management Studio.
You need to identify the authenticated user responsible for starting the package each time it failed in the
past.
Where can you find this information?
A.the SQL Server Log
B.the SSISDB.[catalog].[executions] view
C.the SSISDB.[catalog].[event_messages] view
D.the SQL Agent Job History
E.the SQL Agent Error Log
Answer: B

Microsoft   070-463   070-463 zertifizierungsfragen   070-463

NO.12 You are developing a SQL Server Integration Services (SSIS) package.
To process complex scientific data originating from a SQL Azure database, a custom task component is
added to the project.
You need to ensure that the custom component is deployed on a test environment correctly.
What should you do?
A.Add an OnError event handler to the SSIS project.
B.Open a command prompt and run the gacutil command.
C.Configure the SSIS solution to use the Project Deployment Model.
D.Open a command prompt and run the dtexec /dumperror /conn command.
E.Configure the output of a component in the package data flow to use a data tap.
F.Open a command prompt and execute the package by using the SQL Log provider and running the
dtexecui.exe utility.
G.Open a command prompt and run the dtexec /rep /conn command.
H.Run the dtutil command to deploy the package to the SSIS catalog and store the configuration in SQL
Server.
I.Use an msi file to deploy the package on the server.
J.Open a command prompt and run the dtutil /copy command.
K.Create a reusable custom logging component and use it in the SSIS project.
Answer: B

Microsoft   070-463 zertifizierungsantworten   070-463 antworten   070-463

NO.13 You are designing an enterprise star schema that will consolidate data from three independent data
marts.One of the data marts is hosted on SQL Azure.
Most of the dimensions have the same structure and content.However, the geography dimension is
slightly different in each data mart.
You need to design a consolidated dimensional structure that will be easy to maintain while ensuring that
all dimensional data from the three original solutions is represented.
What should you do?
A.Create a junk dimension for the geography dimension.
B.Implement change data capture.
C.Create a conformed dimension for the geography dimension.
D.Create three geography dimensions.
Answer: C

Microsoft prüfungsfragen   070-463 echte fragen   070-463 prüfung   070-463

NO.14 DRAG DROP
A SQL Server Integration Services (SSIS) package named DataFeed interacts with an external vendor
data feed.The package is executed several times a day, either as part of other packages' control flow or
by itself.The external data feed is unreliable because network failures and slow response times are
frequent.The package is currently deployed on the file system.
To analyze the reliability of the external data feed, you must collect execution data.Every time the
DataFeed package is executed, the following information must be logged:
Start Time
End Time
Execution Result
Execution Duration
You need to design a logging solution that meets the requirements by using the least amount of
administrative and development effort.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:

NO.15 You are designing a data warehouse with two fact tables.The first table contains sales per month and
the second table contains orders per day.
Referential integrity must be enforced declaratively.
You need to design a solution that can join a single time dimension to both fact tables.
What should you do?
A.Create a time mapping table.
B.Change the level of granularity in both fact tables to be the same.
C.Merge the fact tables.
D.Create a view on the sales table.
Answer: C

Microsoft   070-463   070-463 antworten   070-463 prüfungsunterlagen

NO.16 You develop and deploy a SQL Server Integration Services (SSIS) package.
The package is stored in the file system.
You need to execute the package without importing it to the SSIS server.
What should you use to execute the package? (Each correct answer presents a complete
solution.Choose all that apply.)
A.catalog.start_package
B.dtexec
C.SQL Server Management Studio
D.SQL Server Agent
Answer: CA

Microsoft   070-463   070-463   070-463 zertifizierungsantworten   070-463 testantworten   070-463 exam fragen

NO.17 You are designing a data warehouse hosted on SQL Azure.The data warehouse currently includes the
dimUser and dimDistrict dimension tables and the factSales fact table.The dimUser table contains records
for each user permitted to run reports against the warehouse; and the dimDistrict table contains
information about sales districts.
The system is accessed by users from certain districts, as well as by area supervisors and users from the
corporate headquarters.
You need to design a table structure to ensure that certain users can see sales data for only certain
districts.Some users must be permitted to see sales data from multiple districts.
What should you do?
A.Add a district column to the dimUser table.
B.Partition the factSales table on the district column.
C.Create a userDistrict table that contains primary key columns from the dimUser and dimDistrict tables.
D.For each district, create a view of the factSales table that includes a WHERE clause for the district.
Answer: C

Microsoft testantworten   070-463 prüfungsfrage   070-463   070-463 zertifizierungsfragen

NO.18 To facilitate the troubleshooting of SQL Server Integration Services (SSIS) packages, a logging
methodology is put in place.The methodology has the following requirements:
The deployment process must be simplified.
All the logs must be centralized in SQL Server.
Log data must be available via reports or T-SQL.
Log archival must be automated.
You need to configure a logging methodology that meets the requirements while minimizing the amount of
deployment and development effort.
What should you do?
A.Open a command prompt and run the gacutil command.
B.Open a command prompt and execute the package by using the SQL Log provider and running the
dtexecui.exe utility.
C.Add an OnError event handler to the SSIS project.
D.Use an msi file to deploy the package on the server.
E.Configure the output of a component in the package data flow to use a data tap.
F.Run the dtutil command to deploy the package to the SSIS catalog and store the configuration in SQL
Server.
G.Open a command prompt and run the dtexec /rep /conn command.
H.Open a command prompt and run the dtutil /copy command.
I.Open a command prompt and run the dtexec /dumperror /conn command.
J.Configure the SSIS solution to use the Project Deployment Model.
K.Create a reusable custom logging component and use it in the SSIS project.
Answer: J

Microsoft prüfungsfragen   070-463   070-463

NO.19 DRAG DROP
A SQL Server Integration Services (SSIS) project has been deployed to the SSIS catalog.The project
includes a project Connection Manager to connect to the data warehouse.The SSIS catalog includes two
Environments:
Development
QA
Each Environment defines a single Environment Variable named ConnectionString of type string.The
value of each variable consists of the connection string to the development or QA data warehouses.
You need to be able to execute deployed packages by using either of the defined Environments.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:

NO.20 You are reviewing the design of an existing fact table named factSales, which is loaded from a SQL
Azure database by a SQL Server Integration Services (SSIS) package each day.The fact table has
approximately 1 billion rows and is dimensioned by product, sales date, and sales time of day.
The database administrator is concerned about the growth of the database.Users report poor reporting
performance against this database.Reporting requirements have recently changed and the only
remaining report that uses this fact table reports sales by product name, sale month, and sale year.No
other reports will be created against this table.
You need to reduce the report processing time and minimize the growth of the database.
What should you do?
A.Partition the table by product type.
B.Create a view over the fact table to aggregate sales by month.
C.Change the granularity of the fact table to month.
D.Create an indexed view over the fact table to aggregate sales by month.
Answer: C

Microsoft   070-463 prüfungsfragen   070-463 zertifizierungsfragen   070-463 zertifizierungsfragen   070-463 testantworten

Pass4Test bietet Ihnen die neusten 156-215.13 exam Unterlagen und 00M-653 pdf Fragen & Antworten mit hoher Qualität. Unser IIA-CIA-Part3 zertifizierung und ACMA_6.1 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative EX0-101 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.

Artikel Link: http://www.pass4test.de/070-463.html

没有评论:

发表评论