Wenn Sie Ihre Position in der konkurrenzfähigen Gesellschaft durch die CompTIA RF0-001 Zertifizierungsprüfung festigen und Ihre fachliche Fähigkeiten verbessern wollen, müssen Sie gute Fachkenntnisse besitzen und sich viel Mühe für die Prüfung geben. Aber es ist nicht so einfach, die CompTIA RF0-001 Zertifizierungsprüfung zu bestehen. Vielleicht durch die CompTIA RF0-001 Zertifizierungsprüfung können Sie Ihnen der IT-Branche vorstellen. Aber man braucht nicht unbedingt viel Zeit und Energie, die Fachkenntnisse kennen zu lernen. Sie können die Schulungsunterlagen zur CompTIA RF0-001 Zertifizierungsprüfung von Pass4Test wählen. Sie werden zielgerichtet nach den IT-Zertifizierungsprüfungen entwickelt. Mit ihr können Sie mühelos die schwierige CompTIA RF0-001 Zertifizierungsprüfung bestehen.
Die Schulungsunterlagen zur CompTIA RF0-001-Prüfung von Pass4Test sind die besten im Vergleich zu den anderen Materialien. Wenn Sie Schulungsunterlagen, wählen Sie doch die Schulungsunterlagen zur CompTIA RF0-001-Prüfung von Pass4Test. Und Sie würden viel profitieren. Sonst würden Sie bereuen.
Exam Code: RF0-001
Prüfungsname: CompTIA (RFID+ Certification)
Wenn Sie noch zögern, ob Sie Pass4Test wählen, können Sie kostenlos Teil der Fragen und Antworten in Pass4Test Website herunterladen, um unsere Zuverlässigkeit zu bestimmen. Wenn Sie alle unsere Prüfungsfragen und Antworten herunterladen, geben wir Ihnen eine 100%-Pass-Garantie, dass Sie die CompTIA RF0-001 Zertifizierungsprüfung nur einmal mit einer hohen Note bestehen können.
Pass4Test setzt sich aus den riesigen IT-Eliteteams zusammen. Sie alle haben hohe Autorität im IT-Bereich. Sie nutzen professionelle Kenntnisse und Erfahrungen aus, um den an den IT-Zertifizierungsprüfungen beteiligenden Kandidaten die Trainingsinstrumente zu bieten. Die Genauigkeit von Fragen und Antworten von Pass4Test ist sehr hoch. Wir versprechen, dass Sie zum ersten Versuch die Prüfung 100% bestehen können. Außerdem stehen wir Ihnen einen einjährigen Update-Service zur Verfügung.
RF0-001 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/RF0-001.html
NO.1 Desktop industrial RFID-enabled bar code printers handle an inoperative tag by:
A. sending an error to the host.
B. printing 'void' or some other marking on the label.
C. ejecting the label.
D. ignoring it and continuing.
Answer: B
CompTIA RF0-001 antworten RF0-001 prüfungsunterlagen
NO.2 Ideally, as a tag passes though the antenna read window it should be:
A. inside metal foil.
B. on the same plane as the antenna.
C. at least 30 feet (9.3 meters) from the antenna.
D. facing away from antenna.
Answer: B
CompTIA RF0-001 RF0-001 RF0-001
NO.3 An Electronic Product Code (EPC) Class 1 Gen 2 RFID system reads the EPC data from memory bank
zero, but the 64-bit EPC code is always zero. Which of the following is MOST likely the cause of the
problem?
A. The EPC code is stored in Bank 1.
B. The tag has been killed.
C. The EPC code was never written to the tag.
D. The access password is zero.
Answer: A
CompTIA RF0-001 originale fragen RF0-001 dumps RF0-001
NO.4 All of the following are true of widely implemented "slap and ship" programs EXCEPT they:
A. make it difficult to optimize label application for the container.
B. are more susceptible to electrostatic discharge (ESD) than in-line automatic applicators.
C. are lower in cost than application in manufacturing.
D. are more likely to break the bond between the antenna and the chip.
Answer: C
CompTIA RF0-001 zertifizierungsantworten RF0-001 prüfungsfrage RF0-001
NO.5 Tags placed on small boxes uniformly stacked on a pallet are unreadable unless the pallet is rotated.
This is a symptom of tag:
A. propagation.
B. size.
C. shadowing.
D. polarity.
Answer: C
CompTIA echte fragen RF0-001 RF0-001 zertifizierungsantworten
NO.6 A new batch of tags is received for an existing system. When the new tags are introduced into the
system, the interrogation zones stop transmitting tag data. Which of the following is MOST likely the
source of the problem?
A. The new tags are all bad.
B. The new tags are the wrong type for the system.
C. A tag virus has been introduced by the new tags.
D. The interrogators have issued the kill command to the tags.
Answer: B
CompTIA RF0-001 RF0-001 exam fragen RF0-001
NO.7 In a facility with several automated print and apply printers, cases frequently get to the palletizer without
RFID labels. One way to correct this is to:
A. install an interrogation zone down stream from the labeler with a reject system.
B. have an interrogator on the palletizer.
C. use better quality labels.
D. use a hand-held interrogator to scan for missing labels at end of production line.
Answer: A
CompTIA RF0-001 prüfungsfrage RF0-001 zertifizierung
NO.8 While troubleshooting an interrogation zone, a technician discovers that the antenna wires have torn
free of their connectors. Which of the following would be the FIRST step for the technician to take?
A. Secure the cables so they cannot tear free again.
B. Crimp a new end on the cable.
C. Power down the interrogator.
D. Attach the repaired cable to the antenna.
Answer: C
CompTIA RF0-001 echte fragen RF0-001 RF0-001
NO.9 Which of the following RFID tags would be BEST for inconspicuous tagging of assets containing a
maximum of eight bytes of data and are inductively coupled?
A. Active 433.92 MHz tag with strategically installed fixed interrogators.
B. Passive 13.56 MHz tag that is affixed to the asset and camouflaged requiring continuous loop
interrogation.
C. Passive Gen 2 tag requiring line of sight backscatter interrogation.
D. Active 433.92 MHz tag requiring modulated backscatter interrogation.
Answer: B
CompTIA RF0-001 antworten RF0-001 testantworten
NO.10 Cases are going to be tagged and stored in a humid, high temperature area. Which of the following
types of labels would be needed?
A. Poly-coated with gum adhesive.
B. Direct thermal with gum adhesive.
C. Poly-coated with water base adhesive.
D. Paper with gum adhesive.
Answer: A
CompTIA prüfungsunterlagen RF0-001 prüfung RF0-001 RF0-001 antworten RF0-001 echte fragen
NO.11 Which of the following materials have absorptive properties in relation to ultra high frequency (UHF)?
(Select TWO).
A. Damp cardboard
B. Glass
C. Conductive liquids
D. Metal
Answer: AC
CompTIA RF0-001 dumps RF0-001 RF0-001 zertifizierung
NO.12 Which of the following conditions would be MOST likely to cause a ghost tag read?
A. The interrogator did not pass electronic product code (EPC) compliance testing.
B. There is a broken strap between the chip and the antenna on the tag.
C. There are too many tags within an interrogator zone.
D. There is RF interference in an interrogator zone.
Answer: D
CompTIA zertifizierung RF0-001 originale fragen RF0-001 exam fragen RF0-001
NO.13 Which of the following technologies would provide the BEST read range when attached to a
corrugated metal freight container that is 40 feet (12.4 meters)?
A. Passive 13.56 MHz from a one watt interrogator/antenna
B. Passive 860 - 960 MHz from a 4 watt interrogator/antenna C. Active 433.92 MHz, operating at 10 mW
D. Active 2450 MHz, operating at 10 mW
Answer: C
CompTIA RF0-001 RF0-001
NO.14 When troubleshooting an interrogation zone, an operator observes that the interrogator is not
responding to external input or reading tags. The lights are on indicating it has power and network
connectivity. Which of the following would be the next step for the operator to take?
A. Replace the antenna cable.
B. Replace the interrogator.
C. Reboot the interrogator.
D. Reboot the antenna.
Answer: C
CompTIA zertifizierungsantworten RF0-001 RF0-001
NO.15 RFID media should be stored in:
A. electrostatic discharge (ESD) protected packaging.
B. metal containers.
C. rolls of ten.
D. the order that it was received.
Answer: A
CompTIA RF0-001 RF0-001 RF0-001 prüfungsfragen RF0-001 echte fragen
NO.16 Loss of connection between an interrogator and the edgeware/middleware would result in which of the
following?
A. Only active RFID tag data would be processed.
B. No tag data would be processed.
C. Tag data would be sent directly to the Warehouse Management System (WMS).
D. Only interrogator status would be tracked.
Answer: B
CompTIA RF0-001 RF0-001 prüfungsfrage RF0-001 prüfung RF0-001
NO.17 A company wants to track personnel using RFID with a resolution within 10 feet (3.1 meters). Which of
the following RFID systems would provide the BEST results?
A. Active Real Time Locating System (RTLS)
B. Passive ultra high frequency (UHF) RFID system with hand-held interrogators
C. Passive high frequency (HF) RFID system with interrogators at entry points
D. Global Positioning System (GPS)
Answer: A
CompTIA echte fragen RF0-001 echte fragen RF0-001 RF0-001 RF0-001 antworten RF0-001 exam fragen
NO.18 It is important to know where an RFID inlay is located within a tag during printing because: (Select
TWO).
A. the inlay location directs the printer to print landscape or portrait.
B. the inlay sets the speed of the printer.
C. printing over the chip may cause damage.
D. timing from leading edge is critical to the encoding process.
Answer: CD
CompTIA echte fragen RF0-001 RF0-001 RF0-001 RF0-001 prüfung
NO.19 When firmware upgrades become available, which of the following should the technician consider
FIRST?
A. How to install the upgrade.
B. When to schedule the upgrade.
C. Whether the upgrade can be downloaded from the internet.
D. The benefits of new upgrade.
Answer: D
CompTIA RF0-001 RF0-001 zertifizierung RF0-001 prüfungsfragen
NO.20 For a corrugated case filled with liquor bottles containing metal lids, all of the following locations are
acceptable for optimizing the performance of a passive high frequency (HF) RFID smart label EXCEPT on
the: (Select TWO).
A. side near the bottom where there is the most amount of liquid.
B. side near the top where there is the least amount of liquid.
C. bottom where there is the most amount of glass.
D. top near the metal lids.
Answer: AD
CompTIA prüfung RF0-001 RF0-001 RF0-001 RF0-001 prüfungsfrage RF0-001 testantworten
Die Prüfungsfragen und Antworten zur CompTIA RF0-001 Zertifizierungsprüfung von Pass4Test wird von unserem Expertenteam nach ihren umfangreichen Kenntnissen und Erfahrungen überarbeitet. Sie können die Bedürfnisse der Kandidaten abdecken. Sie finden vielleicht in anderen Büchern oder auf anderen Websites auch die Schulungsunterlagen. Aber die Schulungsunterlagen von Pass4Test sind die umfassendeste unter ihnen und zugleich bieten Ihnen die beste Garantie. Bitte wählen Sie die Prüfungsfragen und Antworten von Pass4Test. Sie ist Ihnen die beste Wahl.
没有评论:
发表评论