2013年7月2日星期二

Pass4Test IBM 000-109 Prüfung Übungen und Antworten

Viele Kandidaten, die sich auf die IBM 000-109 Zertifizierungsprüfung vorbereiten, haben auf anderen Websites auch die Online-Ressourcen zur IBM 000-109 Zertifizierungsprüfung gesehen. Aber unser Pass4Test ist eine einzige Website, die von den spitzen IT-Experten nach den Nachschlagen bearbeiteten Prüfungsfragen und Antworten bieten. Wir versprechen, das Sie zum ersten Mal mit unseren Schulungsunterlagen die IBM 000-109 Zertifizierungsprüfung bestehen können.


Es ist nicht so einfach, die 000-109-Prüfung zu bestehen. 000-109-Prüfung erfordert ein hohes Maß an Fachwissen der IT. Wenn es Ihnen dieses Wissen fehlt, kann Pass4Test Ihnen die Kenntnissequellen zur Verfügung stehen. Mit ihren reichen Fachkenntnissen und Erfahrungen bietet der Expertenteam die relevanten Fragen und Antworten der 000-109 Zertifizierungsprüfung. Wenn Sie Pass4Test wählen, versprechen wir Ihnen nicht nur eine 100%-Pass-Garantie, sondern steht Ihnen auch einen einjährigen kostenlosen Update-Service zur verfügung. Falls Sie in der Prüfung durchfallen, zahlen wir Ihnen die gesammte Summe zurück.


Wegen der Beliebtheit der IBM 000-109 Zertifizierungsprüfung haben viele Leute an der IBM 000-109 Zertifizierungsprüfung teilgenommen. Sie können ganz ruhig die Fragen und Antworten zur IBM 000-109 Zertifizierungsprüfung benutzen, die Ihnen helfen, die Prüfung ganz einfach zu bestehen, und Ihnen auch viele Bequemlichkeiten bringen. Es ist allen bekanntm dass Pass4Test eine spezielle Website ist, die Fragen und Antworten zur IBM 000-109 Zertifizierungsprüfung bietet.


Wenn Sie sich noch anstrengend um die IBM 000-109 Zertifizierungsprüfung bemühen, dann haben Sie einen großen Fehler gemacht. Durch fleißiges Lernen können Sie sicher die Prüfung bestehen. Aber Sie können vielleicht das erwartete Ziel vielleicht nicht erreichen. Im Zeitalter des Internets gibt es zahlreiche erfolgreiche IT-Zertifizierungen. Die Schulungsunterlagen zur IBM 000-109 Zertifizierungsprüfung von Pass4Test sind sehr gut. Sie sind zielgerichtet und verprechen Ihnen, die Prüfung zu bestehen. Diese Schulungsunterlagen sind nicht nur rational, sondern erspart Ihnen auch viel Zeit. Sie können mit der ersparten Zeit etwas anderes lernen. So können Sie bessere Resultate bei weniger Einsatz erzielen.


Die Schulungsunterlagen zur IBM 000-109 Zertifizierungsprüfung von Pass4Test sind unvergleichbar. Das hat nicht nur mit der Qualität zu tun. Am wichitgsten ist es, dass Die Schulungsunterlagen zur IBM 000-109 Zertifizierungsprüfung von Pass4Test mit allen IT-Zertifizierungen im Einklang sind. So kümmern sich viele Kandidaten um uns. Sie glauben in uns und sind von uns abhängig. Das hat genau unsere Stärke reflektiert. Sie werden sicher Ihren Freuden nach dem Kauf unserer Produkte Pass4Test empfehlen. Denn es kann Ihnen wirklich sehr helfen.


Viele der Pass4Test 000-109 Virtualization Technical Support for AIX and Linux - v2 Prüfungsvorbereitung Antworten sind in Vielfache-Wahl-Fragen (MCQs) FormatQualität geprüften Virtualization Technical Support for AIX and Linux - v2 Produkte viele Male vor der VeröffentlichungKostenlose Demo der Prüfung Pass4Test 000-109 an Pass4Test.de. Um Ihre Zertifizierungsprüfungen reibungslos erfolgreich zu meistern brauchen Sie nur unsere Prüfungsfragen und Antworten zu IBM 000-109 (Virtualization Technical Support for AIX and Linux - v2 ) auswendigzulernen.


Exam Code: 000-109

Prüfungsname: IBM (Virtualization Technical Support for AIX and Linux - v2 )

000-109 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/000-109.html


NO.1 An administrator is attempting to configure a new deployment of 56 POWER7 Blades across 4 IBM
BladeCenter H chassis. Each blade will be installed with an IVM and 2 LPARs.IVM is installed and the
administrator checks that both LHEA ports are reporting a Link State of "Up." 2 LPARs are created and the
network traffic balanced by allocating one LHEA port to the first LPAR, the second port to the other. After
successfully installing the first LPAR via NIM, the administrator finds the second LPAR fails to netboot.
What should the administrator verify on the BladeCenter Chassis?
A. That 4 power supplies (PSU) have been installed.
B. That both the external LHEA ports have been cabled.
C. That a secondary I/O module has been installed and cabled.
D. That the Multi-Core Scaling (MCS) attribute is correctly set on both LHEA ports.
Answer: C

IBM   000-109   000-109 antworten   000-109   000-109   000-109 zertifizierung

NO.2 An administrator is designing a new system for their existing batch environment. The current system is
a POWER5 570 with 16 cores and 128GB of RAM with a single LPAR running AIX 5.3. It takes 12 hours
to run their large batch job which is heavily CPU bound on 4 the available CPUs.
The new system will be a Power 770 with 16 cores, 128GB of RAM and the LPAR will run AIX 6.1.What
should be done to maximize the batch performance?
A. Activate TurboCore mode during batch processing
B. Disable Simultaneous Multi-threading
C. Disable Multiple Shared Processor Pools
D. Set the processor compatibility mode to POWER7
Answer: B

IBM prüfungsfrage   000-109   000-109   000-109 zertifizierungsfragen   000-109 dumps

NO.3 An administrator must remove any installed efixes before attempting to install a new VIO Fix Pack.
Which VIO command will advise if any VIO efixes are actually present?
A. lslpp
B. emgr
C. lssw
D. oem_platform_level
Answer: C

IBM zertifizierungsfragen   000-109 dumps   000-109 testantworten

NO.4 An administrator has a requirement to back up a VIO server (VIOS) so that it can be rebuilt in the event
of a disaster.
Which set of actions will achieve this requirement.?
A. Backup all non rootvg volume groups using savevg. Backup all Storage Pool Information. Run a
mksysb of the system.
B. Save "Upgrade Data" on the HMC. Backup all non rootvg volume groups using savevg. Run a mksysb
of the VIOS with the -U flag.
C. Backup non rootvg structures using savevgstruct. Capture virtual mappings to a file using viosbr. Run a
backupios
D. Capture the virtual network tuning to a file using the optimizenet command. Capture all virtual device
attributes to a file using the lsattr command. Run a backupios.
Answer: C

IBM prüfung   000-109   000-109   000-109 echte fragen   000-109 originale fragen

NO.5 What will cause a broadcast storm when configuring redundant VIO servers with SEA failover?
A. The secondary SEA is brought online before the configured primary SEA.
B. A mismatch of defined VLANs between the primary and secondary SEA.
C. The secondary SEA is created before enabling failover on the primary SEA.
D. Incorrect EtherChannel configuration on one SEA
Answer: C

IBM prüfung   000-109   000-109   000-109   000-109 zertifizierungsantworten   000-109

NO.6 An administrator has the following configuration on a VIO Server:
Why is this error being displayed?
A. ent3 is configured as 'standard' instead of '802.3ad'
B. ent3 is a LHEA port and requires the -L flag
C. ent3 has no interface connected
D. ent3 is controlled by the SEA
Answer: D

IBM antworten   000-109   000-109 exam fragen

NO.7 Requirements for a disaster recovery site are being collected. When considering restoring a VIO Server
mksysb to disaster recovery hardware,
what is required to ensure automatic virtual device recreation?
A. LPAR profiles must be accurately recreated on the foreign machine
B. Backups of both mksysb and user-defined structures are required from the VIO Server
C. The foreign machine must be of the same model and type
D. Configuration of the existing HMC needs to be preserved
Answer: A

IBM   000-109   000-109   000-109   000-109

NO.8 A Linux LPAR is configured using 802.1Q.
The virtual Ethernet device is configured as an 802.1Q compatible adapter and has VLAN ID 5 configured
in the 802.1Q additional VLAN field.
The administrator runs the following commands on the Linux LPAR shell without errors:
vconfig add eth0 5ifconfig eth0 10.0.0.2 netmask 255.255.255.0
When the administrator tries to ping 10.0.0.1, the request times out.
What is the problem?
A. The VLAN ID should be in the VLAN-ID field in the virtual Network device configuration.
B. The administrator is using the incorrect Ethernet device.
C. The 8021q module is not loaded.
D. The 802.1Q interfaces are not supported on Linux on Power Systems servers.
Answer: A

IBM prüfungsunterlagen   000-109   000-109   000-109   000-109 dumps

NO.9 Which of the following is required to support AME?
A. AIX LPARs
B. Virtual I/O Server
C. A maximum of 4GB of RAM per LPAR
D. On-demand memory feature enabled
Answer: A

IBM   000-109   000-109

NO.10 An architect is looking at the implications of uncapped weights for a new POWER7 system. The
system will consist of four uncapped logical partitions with the following weightings:
Assuming all partitions have equal entitlement and virtual processor configurations in the partition profiles,
and request additional resources from the shared processor pool over a period of 1000 cycles, how many
cycles will be allocated to LPAR B?
A. 150
B. 250
C. 300
D. 1000
Answer: C

IBM dumps   000-109   000-109 antworten

NO.11 An administrator is performing a Live Partition Mobility (LPM) operation between two servers managed
by different HMCs.
While monitoring the performance of the partition, the virtual console window suddenly closes. What is the
most likely cause?
A. The virtual console is controlled by the HMC and closes when the second takes control of the partition.
B. The virtual console is a connection to the FSP of the physical server and closes when the LPAR
migrates.
C. The SSH keys have not been exchanged between HMCs.
D. The FSP has the MAC address for the first HMC cached in NVRAM.
Answer: B

IBM prüfung   000-109   000-109   000-109   000-109

NO.12 How can an existing AIX 5.2 LPAR, which is using SAN storage, be migrated into a versioned WPAR
(Workload Partition)?
A. Using LPM, but downtime will be required.
B. Dynamically using LAM.
C. Backup and restore a mksysb.
D. Rezone the SAN storage and use NPIV.
Answer: C

IBM   000-109   000-109

NO.13 Which interface must be used to provide virtualization of tape library devices to client LPARs?
A. USB
B. LTO
C. Virtual SCSI
D. Virtual Fibre Channel
Answer: D

IBM exam fragen   000-109 zertifizierungsfragen   000-109   000-109

NO.14 What tool can an architect use to determine which is the smallest POWER7 server that will provide
equal or better overall performance than a POWER5 570?
A. Facts and Features Guide
B. LPAR Validation Tool
C. Configurator for eBusiness
D. Server Magic
Answer: A

IBM originale fragen   000-109 zertifizierungsantworten   000-109 zertifizierungsantworten   000-109 echte fragen

NO.15 A Power 720 is being used to build 2 environments: Test and Production, with 2 LPARs in each
environment. Processor resources must be separated between the Test and Production environments to
reduce possible contention, while still being able to share processor resources inside each own
environment.
What are the two features required, as a minimum, to accomplish this? (Select 2)
A. IVM
B. HMC
C. PowerVM Express
D. PowerVM Standard
E. IVE
F. IBM Systems Director
Answer: B,D

IBM   000-109 prüfung   000-109   000-109 prüfungsfrage   000-109

NO.16 An administrator is preparing to upgrade the environment's dual Virtual I/O servers (VIOS) from V1.2
to V2.1
What must considered in preparation for this upgrade?
A. All client LPARs must be shutdown as both VIO servers have to be upgraded to V2.1 at the same time.
B. The VIOS must be upgraded to the latest fixpack of V1.5 before upgrading to V2.1.
C. The only upgrade method that will be supported is using NIM because the current VIOS is lower than
V1.3.
D. VIOS V2.1 requires AIX clients to be running AIX V6.1 at a minimum.
Answer: B

IBM zertifizierungsantworten   000-109 antworten   000-109

NO.17 When attempting to install a VIO client using NIM, an adminstrator finds that no disks are available for
installation. The disks are provided by NPIV through the virtual Fibre Channel adapter as described here:
Which of the following explains why is the administrator unable to see the disks?
A. The virtual fibre channel device has not been assigned to the client.
B. The HBA on the VIO server is not connected to the SAN.
C. The fibre device drivers are missing from the SPOT.
D. The LUNs have been incorrectly zoned.
Answer: D

IBM   000-109 prüfungsunterlagen   000-109 zertifizierungsantworten   000-109

NO.18 An LPAR is configured using Virtual IO. It has two Virtual SCSI adapters, connecting it to two VIO
servers.
The disks presented over Virtual SCSI are available across both Virtual SCSI adapters (2 paths).
Assuming 20 disks are required, what is the maximum recommended queue depth to maximize
performance?
A. 20
B. 22
C. 510
D. 512
Answer: A

IBM   000-109   000-109

NO.19 The wlmstat -@ 2 command has been run from a global environment with the following results:
What action can an administrator take to set limits, so that both server1 and server2 use the same amount
of CPU resources?
A. Use the cpu_deallocate -P command to reduce the CPU resources on server2
B. Use the chsysres command to assign the same CPU attributes to both servers.
C. Use the chwpar -R command to set the CPU attributes for each server.
D. Use the syncwpar -E command to copy the CPU resource allocation from server1 to server2.
Answer: C

IBM zertifizierungsfragen   000-109 prüfungsfrage   000-109

NO.20 An administrator is creating several LPARs on a new Power Systems server. The administrator knows
that Live Partition Mobility (LPM) will be used to distribute the workload between this new machine and
several others in the environment.
In addition to ensuring all storage is allocated through Virtual IO servers, what else must the administrator
take into consideration when creating the new LPARs?
A. LPAR names in the environment must be unique.
B. Redundant error path reporting must be configured.
C. Only LPARs belonging to the same workload group can be moved between servers.
D. The Virtual IO server code level must be the same across all servers.
Answer: A

IBM zertifizierungsfragen   000-109 zertifizierungsfragen   000-109   000-109   000-109 prüfung

Pass4Test ist nicht nur zuverlässig, sondern bietet auch erstklassigen Service. Wenn Sie die Prüfung nach dem Kauf der Pass4Test-Produkte nicht bestehen, versprechen wir Ihnen 100% eine volle Rückerstattung. Pass4Test steht Ihnen auch einen einjährigen kostenlosen Update-Service zur Verfügung.


没有评论:

发表评论